dual monitor arm, dual monitor mount, dual monitor desk mount

Bought it to mount a 34 inch Ultrawide and a 24 inch vertically mounted monitor on a 54" by 32" inch standing desk.Comes in a very smart looking packaging with a handwritten note from the small business owner! Good touch! Includes all the right parts to put the mount together and fairly intuitive instructions to follow. Except for needing a screwdriver to install the vesa mount on the monitor, everything else is included. From the get go, the finish feels premium. Not the usual bright gathering blacks but a matte finish. The essential parts are made out of metal and feel hefty so immediately quell any concern that it would have any issue holding the weight of the monitors.Took a little bit of elbow grease to install the mount/fine tune the mount, primarily to make the adjustments to work with my configuration. Good thought went into Cable management and the housing for cables allows ample space for a power cord and a video input cord to be nicely nested in the housing.Having used it for about a week now, have not experienced any sagging of the monitors and I don't anticipate that there would be any concern in the near future. The description seems quite accurate that it can easily mount two side by side configuration of 32 inches without any concerns. For a side by side, full arm extension, mount in the middle, you only need maybe 1-2 inches from the wall.The only dock that I can think of that certain configurations and how close/far may push the arm back into the wall, so something to bear in mind while ordering or seeking clarification from the business owner. My vertical mounted monitor (based on a side mount configuration), tends jut into the wall if pushed too far back. I anticipate that most users, lock it and forget it most of the time, so its not an issue but just something to be aware of.All in all, its a quality product that saves lot of desk space and fulfills most of the needs. At its current price point, I think matches quite well and exceeds with comparative products in the market. I was considering Ergotron, Amazon's dual mount (which was out of stock), Huanao, but have been very impressed with the quality of the product and apart from subjective aesthetics, don't anticipate any complaints as far as the functionality of the mount.Big thumbs up and a great job, overall.

First off, I love the C-Clamp. My desk has a 2nd "shelf" built on top of the main desk surface which is where the monitor is expected to sit. The space between the desk surface and the shelf is too short a clearance for normal C-Clamp monitor mounts because the tightening bolt underneath would be too long and keep me from getting a good bite on the platform. This mount design solved that problem for me.It's also very quick to tighten or loosen. Few turns are needed to widen the jaw a reasonable length. You will not get carpel tunnel shifting to different positions as you test.The cable management is entirely tool-less. Each arm has a plastic cable clip that snaps into place nearest to the monitor, and those can squeeze 3-4 cables depending on thickness (my thick DP cables were a bit tight but I rather like that they aren't going anywhere). The lower arms have a not-so-flimsy plastic plate that slide upward and out to detach. You can catch the cables you want to route through and slide them right back in. No screws needed. The backside of the base also has some routing clips, plus a couple holsters for your allen wrenches! No need to throw those away or stuff them in a drawer and pray you never need them.The mounting arms have enough tension to hold both of my 34" monitors. They cannot be stacked, and I haven't tested how well I could squeeze them side-by-side (may work with more of a cornered setup). For me, one of the 34" screens is vertical (by design - I know it's weird, sue me). Both arms seem to hold their positions very consistently and with minimal wobble from outside vibrations.The VESA brackets they used made it really easy to simply install the bracket on the monitor first, then slip the monitor on the arm after maxing out the tension. Then I could make finer adjustments from there. There's no wobble or "give" in these clip-on brackets. All metal, very sturdy.Overall, nothing about this dual-monitor mount feels cheap. What little plastic it uses also feels like it was made with quality standards. It had all the features I could reasonably ask for, and it exceeded my expectations.

I really wanted to like this mount - It has a premium appearance to it with a wide, metal base that would help ensure a more firm clamp. Indeed, the clamp works very well, is tight, and secure, but there was some give to the arms themselves as if the tension was not enough for my 27" and 30" monitor, particularly for the larger one.I reached out to the seller and they sent me a replacement. The new one works MUCH better (though not "perfectly") -- both monitors now stay where they are supposed to.Overall, the monitor stand works well, and I must commend that customer service was good and took care of the issue with the first stand.Now on to the details:1. Installation was simple and straight-forward except for one step: do not reverse the cable organizer arm the way I did in the photo: the holes should be facing down2. Monitors stay on sturdy and tension can be adjusted easily3. Rotation of the monitors in 360 degrees was effortless4. Desk is MUCH MUCH more clean looking and organized than with monitor stands5. Clamp stays on very securely6. You need some extra space at the back of the table -- in my photos, you can see a wall is behind and that limits the range of motion the arms can achieveI've updated the 4-star rating to 5 stars after a few months of use. Loving it!

Shockingly good quality, desk setup is like 100x nicer now, adjusting height and angles are a breeze, worth every penny

I have a 32 inch and 28inch both near 14 pounds fixed on this and the mount is solid. The stands come packaged compactly with various types of screws for different types of monitors. Once setup make sure to set the tension correctly otherwise you will see the monitors drop. Once set they work perfectly. Nice and sturdy design to hide wires and keep the tension screws. For those who have lots of space these will work perfectly. For those a bit cramped you may need 2 or 3 adjustments to get your setting right. Overall sturdy and solid design and does exactly what it needs to do

10/10 Will reccomend this to everyone only took 30mins to setup but i do recomend buying yourself some longer hdmi cables.Product is fantastic quality and would happily buy again easily holding my 32'' and 27'' monitors !

love that its heavy duty, make sure your mount isnt against any walls for optimal motion range.